Description
The Merlin GDP2 is a two zone gas detection panel which can be used in many applications such as factories, car parks, shopping centres and most commonly – boiler houses.
Merlin GDP2 (2 Channel Detector)
- Gas valve output
- Can be used with up to 6 gas detectors
- Connections for BMS
- Connection for sounder/strobe
- Clear LED display for system indications
- Easy to Install
- Covered by S&S Northern ltd 3 year warranty
| Specification | |||
|---|---|---|---|
| General | Electrical | ||
| Product | GDP2 Gas Detector Controller | Max. Power Consumption | 20W Max (Full Load) |
| Use | Indoor, Safe Areas (not to be used in potentially explosive atmospheres) | Power Voltage Input Range | 100-240Vac |
| Indicators | LED | Gas Valve Output Range | 100-240Vac |
| Mounting | Wall Mounting | I/Os | 24VDC Outputs (Detector / Strobe or Sounder) |
| Switch Inputs | 3x Open/Close (EM Stop / Heat Sensor / Fire Panel) | ||
| BMS | Volt Free (Normally Closed / Common / Normally Open) 3A Max | ||
| Relay(s) | 2x 240VAC 10A (Latching Switch) | ||
| Terminal Wire Ratings | Copper 18AWG (0.75mm²) Min. × 29 screw terminals | ||
| Fuse | 3.15A | ||
| Construction | Environmental | ||
| Dimensions (H x W x D) | 140 x 190 x 62mm / 5.51 x 7.48 x 2.44” | Ingress Protection | IP65 (Pre-installation) |
| Unit Weight (Approx.) | 0.7kg / 24.7oz | Storage Conditions | Dry, Cool, Flat |
| Housing Material | Polylac – PA765 | Operating Conditions | -10 ~ 50°C / 14 ~ 122°F, 30 ~ 80% RH |
| Compliance | |||
| Certifications | CE / UKCA EN 61326-1 / BS EN IEC 61010-1 | ||
